WEEK 4

Date: 30/9/13

Introduction

Project research (Final) is the last method that used in this project for finishing good. It consists of the combination with all the problem encountered and the information that obtained from the research with the best solution for the purpose to create the block diagram that will be used in this project. Block diagram is a diagram of a system in which the principal parts or functions are represented by blocks connected by lines that show the relationships of the blocks. At the end of this section, a complete block diagram will be shown.

Objective 

• To compress all the information that obtained from research to make it as best solution for the good project.
• To design the block diagram that exactly with the required specifications for this project.

Problem Encountered

From this activity, it is not have much problem because the information that used to make as best solution is from the previous gathered data and it will not give any problem to develop block diagram.

Project Description

The information's that gathered from previous research is compressed to achieving the main objective of project which is a simple and effective way to detect an electrical power theft without any human interface. The details about it is as in the project description on the previous weekly report (WEEK 3).

Project Outcome 

Block diagram is created based on the solution that performed and the block diagram is such as below:-

Figure 1: Block Diagram

The concept that will be used in Electricity Theft Detection Metering System is such as block diagram above. Others progress will be continued on next week.